VHP Pass Box

Is designed to perform low temperature surface bio decontamination at room temperature with 35% H2O2 Concentration.

  • To enable safe transfer of heat sensitive material into sterile production cleanroom (as they are not autoclavable).   
  • Method of H2O2 Injection – Wet Type  
  • Sterilization Assurance Level: 6 Log Reduction is ensured by our equipment, on all exposed surfaces.
  •  
  • Leak Test Phase
  • Conditioning (i.e., H2O2 Injection) Phase
  • De-contamination Phase   
  • Aeration / Ventilation Phase.

Disinfection level and the process time required to reach the required disinfection

  •  
  •  Porosity of the surface materials.   
  •  Shape of the pass box.    
  •  Volume of the pass box. 
  •  Distribution of the aerosol in the pass box. 
  •  Can be supplied along with AHU, De-humidifier and BIBO Unit with exhaust HEPA.

a.) Power Supply – 1 Phase, 230 V ± 10 V, 50 ± 5 Hz Or – 3 Phase, 415 V ± 10 V, 50 ± 5 Hz.

b.) Compressed Air     – 0.5 Bar to 4 Bar.

  • Overall dimension of our equipment is customized, based on the site / client requirement.
vhp pass box 2
vhp pass box 4

Key Features

  • Design is in line with CGMP and GAMP5 requirements.
  • In compliance with 21 CFR Part 11 requirements.
  • Equipped with necessary Safety and Process Interlocks.
  • Multiple recipes / cycles can be created.
  • Exclusive Operating (IPC) panel and Monitoring (HMI) panel are supplied (if need be).
  • Easily operable.
Download